Quick Links
SoundLOG

SoundEar II Industry XL®

Popular large display for big factories and workshops. Clearly shows when staff should reduce noise levels or fit hearing protection.
RED warning when noise level exceeds a pre-set limit.
YELLOW when nearing limit.
GREEN confirms monitoring.

For use in:
  • Large factories, workshops and industrial settings
  • Plant and facilities with varying noise levels or intermittent noise
  • See SoundEar II for hospital, office and venue displays
Features:
  • Invauable tool for supervisor to demonstrate and monitor noise levels
  • Attractive design for use in industrial areas
  • Dust and waterproof - can be used indoors as well as outdoors
  • Easy single screw wall mounting. Powered from normal wall socket. Warning level adjustable from 40 to 115 dB(A)
Optional Extras:
  • Optional USB SoundLOG records sound levels for analysis and reporting for up to 4 weeks.
  • Optional SoundLog provides 24/7 data logging and evidence of compliance.
  • Optional microphone for recording in a different location

SoundEar II Industry XL®

Big signs for big locations!

In workplaces where noise levels depend on location and production processes, it is sometimes difficult to decide whether ear protection is required.

SoundEar II Industry XL® leaves nothing to chance. When noise levels exceed a preselected level a large red silhouette of a head with ear muffs is illuminated. Employees can then take hearing protection steps or move away from the noise.

Dust and waterproof, SoundEar II Industry XL® can be used indoors as well as outdoors.

Couple this with the optional USB SoundLOG and real time 24 X 7 X 365 day noise exposure readings can be collected. A record of the noise levels reached over a day, job or up to 4 weeks of continuous levels. This data can be used to prove noise levels generated and employee noise exposure levels.

If the source of noise needs to be indicated in a different location, an optional microphone can be connected via cable up to 20 meters from the SoundEar II.

SoundLog

SoundLog is SoundEar II, SoundEar II Industrial and SoundEar II Industry XL’s optional data logbook.

Provides evidence of compliance and data logging.

A small USB module plugs into the base of the SoundEar II. Saves measurement made by the SoundEar II for up to 4 weeks. Transfer the data from the SoundLog Module to the computer.

With SoundLog software, you can see the measurements for up to 4 weeks on a ready-to-print graph or cut and paste into your reports.

Displaying the sound measurements on a graph across time, it is possible to see exactly how many decibels the sound level reaches and when. In this way, the graph can show where and when noise problems arise, and compares the sound conditions for different weekdays or times of day. The knowledge obtained from this graph makes it easier to accommodate periods of increased noise strain in advance.

SoundLog visualizes and documents the room noise level, thus providing a qualified substitute for previous, less accurate, noise reports.

SoundEar II Base
You can pre-set your SoundEar II® to provide
a visual warning sign consisting of a red light
at 16 noise limits ranging from 40 to 115 dB(A).

Use the red wheel at the bottom of the device
to select the desired noise limit.

SoundEar II Base
SoundEarII® can be connected to an external microphone.

SoundEar II Base
SoundEar II® measures sounds and the
measurements are saved by the data log.
The computer program delivered along with the
data log allows the measurements from the last
four weeks to be shown in a printable graph.

Back to top